NURTEKS Quality Assurance Structure

At NURTEKS, quality is an integral part of the manufacturing process, and quality checks are performed at key stages of the production process by the Quality Assurance Department. Without its approval, no products are processed or shipped.

Fabric Quality Control

In order to ensure that fabrics meet customer specifications and match original customer approved samples, before they are transferred to the warehouse the following steps are followed:
. Products are subjected to color, durability, shrinkage and other tests as required by the customer. They are certified only after complying with these requirements.
. To ensure continuity, 100 percent of the fabric is tested for color and unless the customer specifies otherwise, remaining tests are conducted by the sampling method.
. In every control and production process, the results of the production control department are also evaluated.
. After quality assurance-approved fabrics arrive at the warehouse, quality control staff checks accessories like collars and cuffs to ensure compatibility of sizes.

Kesim

Doğru sipariş için doğru kumaş kesiliyor mu ?
Doğru renk, model, ölçüde doğru miktarlarda kesiliyor mu? sorularına cevap aranır. Tüm bunlara rağmen, uygunsuzluk tespit edildiğinde üretim durdurulur ve ancak problem düzeltildikten sonra üretime devam edilir.

Production

. By recording and analyzing customer requirements, standards and changes, a customer file is created for inspectors, which includes all information relating to the customer-confirmed accessories, fabrics, and yarns for every customer and model.
. Before production starts, a RED-TAG or Green Seal production run is carried out in conjunction with the Quality Assurance Department to confirm that the sample size to be used is in accordance with specified standards, with this sample being used for control purposes throughout the production process.
. Production is monitored through periodic inspections.
. Before shipment, samples are inspected on behalf of the customer. If the number of defects is within the acceptable range, the Quality Assurance Department approves the products, and they are shipped.